Apogee news

We've made several updates to Apogee with the release of ios V 1.75 and firmware version 1.28. The Android version of 1.75 is expected within 2 weeks.

Features include the addition of a circuit on timer, allowing you to delay automatic circuit activation from 0 seconds to 5 minutes. This is useful to prevent heavy loads hitting right at vehicle startup, and all at once.

We've also dramatically simplified CAN address/byte information programming. Now, you just enter the address, enter the byte location (0-7), and the 2 digit hex code. As part of this we've also added to ability to select a simple circuit activation or a latched activation, in addition to the ability to select circuit on/off, and the percent on.

As part of this, we've now decoded the 2026 Triumph Trident, with about 20 CAN triggers including:

• brake activation

• clutch activation

• high/low beams

• gear selection (neutral, 1-6)

• up/down/left/right buttons

• check button

• left/right/cancel turn signal buttons

• ride mode

This is just the beginning of what will be an extensive library of CAN triggers allowing you to use vehicle CAN activities to initiate Apogee circuit activation. The library is located in our Apogee support pages.